Since most 10G Ethernet switches support a combination of copper RJ-45 and open SFP+ ports, the x4120 allows users to convert either of these ports to the media type of their preference to match their network requirements, including direct attached copper SFP+ cables.Дownload the datasheets for the slide-in-card C4120 andВ the stand-alone S4120 for more information about this solution: C4120-1048 The x4120 provides several 10G Ethernet enterprise and data center connectivity solutions. The open SFP+ port supports a wide variety of Transition Networks 10GE SFP+ fiber modules, as well as third party MSA compatible SFP+ modules. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port. The x4120-1048 is a 10 Gigabit Ethernet copper to fiber media converter.

Devices can perform automatic configuration to achieve the best possible mode of operation over a link.

Converters automatically re-establish link in all network conditions.

Loopback feature: puts the converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.

Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port-thus notifying the end device-while maintaining the fiber link between the two converters.

Transition Networks Media Converters offer an extended list of features including: Keep reading below for features and benefits of choosing Transition Networks Media Converters. The x4120-1048 is part of the ION Family of products, and is available in Stand Alone or Chassis Card. Transition Networks offers media converters that operate as transceivers, allowing network devices to be connected using existing equipment and can extend your current network. * '0' for square edges, '10px' for rounded edges, '40px' for pill shape This will change all buttons */ After you have updated your stylesheet, make sure you turn this module offДЄ media converter is an adaptable device used to connect two different media types, like copper and fiber optic cabling.

Transition network media converter